Welcome to Cangzhou Zhuoheng Pipeline Equipment Manufacturing Co., Ltd.
The technical differences between elbows and bent pipes.
Release time:
12 Nov,2021
The price of elbows is higher than that of bends, but the cost-performance ratio is much better than that of bends. Uncoated elbows are prone to damage, but due to their low price, they are widely used in projects with less stringent requirements. Therefore, it is necessary to pay attention to the different performance and prices of elbows and bends.
The essential difference between a bend and a elbow is mainly the difference between "head" and "pipe". In addition, the manufacturing process is also very different.
An elbow is a commonly used connecting fitting in plumbing installation, used to connect the corners of pipes and change the direction of the pipes. It is used to connect two pipes with the same or different nominal diameters for turns of 90°, 45°, 180°, and various angles.
Here is a brief introduction to the differences between bends and elbows in the production process:
1. Bends are shorter than elbows. R = 1 to 2 times is a bend, while larger multiples are called elbows.
2. Cold bending of pipes can be done with ready-made straight pipe bending machines, completed in one go without needing two anti-corrosion treatments. However, elbows should be customized by the manufacturer, which has a long ordering cycle.
3. The price of elbows is higher than that of bends, but the cost-performance ratio is much better than that of bends. Uncoated elbows are prone to damage, but due to their low price, they are used very frequently in some projects with less stringent requirements. Therefore, it is necessary to pay attention to the different performances and prices of bends and elbows.
Tag:
Previous Page
Next Page
RELATED INFORMATION
What types of flanges are used in the petrochemical industry?
In many applications, engineers need to find a way to safely close a chamber or cylinder, often because the composition or pressure of the internal material must be different from that of the external material.
18 Oct,2024
What is the difference between butt welding fittings and socket fittings?
Butt welding connection is to fix the two parts completely after spot welding. Of course, the requirements for welders are also slightly higher, as butt welding needs to undergo 100% RT inspection under strict working conditions.
18 Oct,2024
What aspects should be considered when using stainless steel flanges?
The stainless steel flange is a flange that connects steel pipes, fittings, etc. into the flange and connects to equipment or pipelines through corner welds. The inner hole on one side of the flange is equipped with a welded boss, which has an inner hole. The inner hole is connected to the inner hole at the center of the flange, and there is elasticity between the flange and the welded boss.
18 Oct,2024
What types of flanges do we often use?
The main types of flanges are welding neck, long welding neck, lap joint, threaded, and blind flanges, as well as slip-on, socket weld. In addition to these standard flanges, there are also some special flanges, such as rotating flanges, expansion/reduction flanges, and hole flanges.
18 Oct,2024
Product information about elbows
Steel pipe elbows (sometimes also referred to as elbows) are key components in pressure piping systems used to change the direction of fluid flow. They are used to connect two pipes with the same or different nominal diameters.
18 Oct,2024
Specializing in the production of various pipeline equipment
Main Products
The company's products mainly include three series and more than 100 varieties: main ceramic wear-resistant pipes, pipe fittings, bimetal surfacing wear-resistant pipes, elbows, elbows, tees, crosses, reducers, pipe caps, flanges, supports and hangers, waterproof sleeves, corrugated compensators, etc.
Contact Us
Tel:+86-317-5121666
E-mail:yongle@zhsteelfittings.com
Website:www.yszhuoheng.com
Address: No. 12, Pu 1st Road, Pu Wa Industrial Park, Yanshan County, Cangzhou City, Hebei Province
Quality of service to win customer satisfaction
Scan code to browse the official website
Find out more product information at any time
Address: Wuli Kiln Industrial Zone, Yanshan County, Cangzhou City, Hebei Province
Tel:+86-317-5121666
Request Quote
* Note: Please be sure to fill in the information accurately and keep the communication unblocked, we will get in touch with you as soon as possible!